Part Numbers: BS3D-MK100-125 to BS3D-MK100-SCH200 (full list below)
Mock it up before you cut it. This 100-piece modelling kit lets you build the full exhaust, intercooler or custom pipe route in place on the car or bike, check clearances, bend positions and angles, then use the finished mock-up as your fabrication guide. Cheaper than scrapping a length of stainless, and far faster than tacking up and cutting apart.
Features
- Build the complete route in place before cutting real tube
- Check clearances, bend positions and angles
- Expanders join the kit onto existing pipe
- Use the finished mock-up as a cut-and-weld guide
What's in the Box
2 x Expanders (join the kit onto existing pipe)
4 x Start straights
4 x Start bends
10 x 9 degree bend sections
25 x 15 degree bend sections
25 x 30 degree bend sections
4 x 2-bolt exhaust / manifold flanges
26 x Straight sections, assorted 20mm to 100mm
Total: 100 pieces
Sizes and Part Numbers
| Tube Size |
Part Number |
| 1.25" |
BS3D-MK100-125 |
| 1.5" |
BS3D-MK100-150 |
| 1-5/8" |
BS3D-MK100-1625 |
| 1.75" |
BS3D-MK100-175 |
| 1-7/8" |
BS3D-MK100-1875 |
| 2" |
BS3D-MK100-200 |
| 2.25" |
BS3D-MK100-225 |
| 2.5" |
BS3D-MK100-250 |
| Schedule 1-1/4" |
BS3D-MK100-SCH125 |
| Schedule 1-1/2" |
BS3D-MK100-SCH150 |
| Schedule 2" |
BS3D-MK100-SCH200 |
Sizes are tube outside diameter unless marked Schedule (nominal pipe size). Made by Back Shed 3D.
