Part Numbers: BS3D-YPJ-200-10D to BS3D-YPJ-400-15D (full list below)
Getting the two halves of a Y-pipe to match is where most of the hand-fettling happens. This jig locates mandrel bends in the right position for Y-pipe cuts, so both sides come off the bandsaw matched and ready to tack. Less time with the linisher, a tighter gap to weld, and a merge that flows properly.
Features
- Locates mandrel bends correctly for Y-pipe fabrication
- Matching cuts for both sides of the Y
- Available in 1D, 1.2D and 1.5D CLR
- Sizes from 2" to 4"
Choosing CLR: CLR (centreline radius) is the bend radius as a multiple of tube diameter. A 2" 1.5D bend has a 3" centreline radius. Match the jig CLR to the mandrel bends you're cutting.
Custom CLR: Back Shed 3D can make jigs to suit a specific bend radius. Contact us with your bend details for a quote.
What's in the Box
1 x Mandrel bend Y-pipe jig in the selected size and CLR
Sizes and Part Numbers
| Tube Size |
CLR |
Part Number |
| 2" |
1D |
BS3D-YPJ-200-10D |
| 2" |
1.2D |
BS3D-YPJ-200-12D |
| 2" |
1.5D |
BS3D-YPJ-200-15D |
| 2.5" |
1D |
BS3D-YPJ-250-10D |
| 2.5" |
1.2D |
BS3D-YPJ-250-12D |
| 2.5" |
1.5D |
BS3D-YPJ-250-15D |
| 3" |
1D |
BS3D-YPJ-300-10D |
| 3" |
1.2D |
BS3D-YPJ-300-12D |
| 3" |
1.5D |
BS3D-YPJ-300-15D |
| 3.5" |
1D |
BS3D-YPJ-350-10D |
| 3.5" |
1.2D |
BS3D-YPJ-350-12D |
| 3.5" |
1.5D |
BS3D-YPJ-350-15D |
| 4" |
1D |
BS3D-YPJ-400-10D |
| 4" |
1.2D |
BS3D-YPJ-400-12D |
| 4" |
1.5D |
BS3D-YPJ-400-15D |
Sizes are tube outside diameter. Made by Back Shed 3D.
