Part Numbers: BS3D-PCJ-150-09 to BS3D-PCJ-400-15 (full list below)
Pie-cut bends look great and get you around tight spots no mandrel bend will, but marking every segment by hand is tedious and the errors stack up. This guide sets the cut angle for you, so each segment comes off the saw the same as the last. Choose 9 degree for smoother, tighter-looking radii or 15 degree for fewer segments per bend.
Features
- Repeatable pie cuts without marking each section
- 9 degree or 15 degree cut angle
- Ideal for headers, manifolds, turbo dumps and intercooler piping
- Sizes from 1.5" to 4"
What's in the Box
1 x Pie cut jig in the selected size and angle
Sizes and Part Numbers
| Tube Size |
Cut Angle |
Part Number |
| 1.5" |
9 Degree |
BS3D-PCJ-150-09 |
| 1.5" |
15 Degree |
BS3D-PCJ-150-15 |
| 1.75" |
9 Degree |
BS3D-PCJ-175-09 |
| 1.75" |
15 Degree |
BS3D-PCJ-175-15 |
| 2" |
9 Degree |
BS3D-PCJ-200-09 |
| 2" |
15 Degree |
BS3D-PCJ-200-15 |
| 2.25" |
9 Degree |
BS3D-PCJ-225-09 |
| 2.25" |
15 Degree |
BS3D-PCJ-225-15 |
| 2.5" |
9 Degree |
BS3D-PCJ-250-09 |
| 2.5" |
15 Degree |
BS3D-PCJ-250-15 |
| 3" |
9 Degree |
BS3D-PCJ-300-09 |
| 3" |
15 Degree |
BS3D-PCJ-300-15 |
| 3.5" |
9 Degree |
BS3D-PCJ-350-09 |
| 3.5" |
15 Degree |
BS3D-PCJ-350-15 |
| 4" |
9 Degree |
BS3D-PCJ-400-09 |
| 4" |
15 Degree |
BS3D-PCJ-400-15 |
Sizes are tube outside diameter. Made by Back Shed 3D.
