Brian Crower Stainless Steel +1mm OverSize Intake & Exhaust Valves Set Nissan SR20 SR20DET RWD
Brand: Brian Crower
Part Number: BC3204/BC3209
Description:
Brian Crower Stainless Steel Intake Exhaust Valve KIT SR20 SR20DET +1mm OverSize
When it's time to build your head, it would be wise to take the "do it right, do it once" approach. Taking your engine apart to replace its internals is a costly process that takes a good bit of time. We recommend that while your head is off, and apart, that you replace the valves, seals, and possibly even guides. Cutting corners to avoid the cost of these things often ends in a results that will make you wish you had done them up front. Don't be that guy that installs valve springs and retainers without replacing the valves to save a couple hundred bucks, then ends up dropping an old high mileage valve into his engine 1000 miles later because it was at the end of its service life. If you are unsure about what size, or brand of valves to select, please contact us now so we can help guide you through the process..
SR20DE(T) STAINLESS STEEL VALVES
BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head.
Fitment
-
Make: Nissan / Infiniti
-
Model: 240SX 89-94 S13, 240SX 95-98 S14, Silvia 89-94 S13, Silvia 95-98 S14, Silvia 99-02 S15
-
Engine: SR20DET
Specifications
-
Valve Size: 35.15mm (0.040" Over), 31.15mm (0.040" Over)
-
Stem Diameter: 5.97mm In / 6.94mm Ex
-
Valve Length: 101.4mm In / 102.4mm Ex
-
Valve Head Size: 0.040" / 1mm
-
Valve Head Diameter: 31.15mm, 35.15mm
-
Valve Type: Intake & Exhaust
-
Valve Stem Diameter: 5.97mm, 6.94mm
-
Valve Material: Stainless Steel
-
Valve Finish: Polished
-
Valve Face: Dish
Please note: This is a special order item by Stealth Ride. Usual wait times are 5–20 working days. If your order is urgent or you're concerned about potential delays, please contact us before purchasing.
