Front Strut Rod - To Chassis Bushing Kit to Suit Nissan Navara D21 and Pathfinder WD21
Details:
Foot Note 3: Limited Lifetime Warranty
Sub Brand: Replacement
Components Per: 4 Bushings, 2 Tubes, 4 Washers
Fitting Position: Rear
Wheel Alignment: Yes
Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.
Installation time: 2 Hours
Kit Contents: 4 Bushings, 2 Tubes, 4 Washers
Descriptions:
Benefit Note:
Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle. Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.
Vehicle Types;
- Make/Model: FORD MAVERICK, Chassis Group: 1993-1998 | MAVERICK UDS, UNS, Important Note: Crush tube 62mm L
- Make/Model: HOLDEN JACKAROO, Chassis Group: 1985-1992 | JACKAROO UBS I USB16, UBS17, UBS55
- Make/Model: HOLDEN RODEO, Chassis Group: 1988-2003 | RODEO TFR 2WD
- Make/Model: ISUZU TROOPER, Chassis Group: 1984-1991 | TROOPER UBS I
- Make/Model: KIA CARNIVAL, Chassis Group: 1999-2006 | CARNIVAL UP, GQ
- Make/Model: NISSAN CABSTAR, Chassis Group: 1982-1992 | CABSTAR F22
- Make/Model: NISSAN CABSTAR, Chassis Group: 1992-2000 | CABSTAR F23, H42
- Make/Model: NISSAN DATSUN, Chassis Group: 1985-1997 | DATSUN D21 2WD, Important Note: Crush tube 62mm L
- Make/Model: NISSAN DATSUN, Chassis Group: 1985-1997 | DATSUN D21 4WD, Important Note: Crush tube 62mm L
- Make/Model: NISSAN DATSUN 280C, Chassis Group: 1977-1984 | DATSUN 280C P330, P430, Important Note: Suits P430 models
- Make/Model: NISSAN HOMY, Chassis Group: 1982-1992 | HOMY E23, Important Note: Crush tube 62mm L
- Make/Model: NISSAN HOMY, Chassis Group: 1987-2010 | HOMY E24
- Make/Model: NISSAN LAUREL, Chassis Group: 1981-1985 | LAUREL C31
- Make/Model: NISSAN NAVARA, Chassis Group: 1985-1998 | NAVARA D21 2WD, Important Note: Crush tube 62mm L
- Make/Model: NISSAN NAVARA, Chassis Group: 1986-1998 | NAVARA D21 4WD, Important Note: Crush tube 62mm L
- Make/Model: NISSAN NAVARA, Chassis Group: 1997-2015 | NAVARA D22 2WD, Important Note: Crush tube 62mm L
- Make/Model: NISSAN PATHFINDER, Chassis Group: 1986-1995 | PATHFINDER WD21, Important Note: Crush tube 62mm L
- Make/Model: NISSAN TERRANO, Chassis Group: 1986-1996 | TERRANO WD21, Important Note: Crush tube 62mm L
- Make/Model: NISSAN TERRANO II, Chassis Group: 1992-2007 | TERRANO II R20, Important Note: Crush tube 62mm L
- Make/Model: NISSAN URVAN, Chassis Group: 1980-1986 | URVAN E23, Important Note: Crush tube 62mm L
- Make/Model: NISSAN URVAN, Chassis Group: 1987-2010 | URVAN E24
- Make/Model: NISSAN UTE, Chassis Group: 1980-1986 | UTE 720 4WD, Important Note: Crush tube 62mm L
- Make/Model: TOYOTA DYNA, Chassis Group: 1985-1995 | DYNA LH81, YH81
- Make/Model: TOYOTA DYNA 100, Chassis Group: 1985-1995 | DYNA LH81, YH81
- Make/Model: TOYOTA HIACE, Chassis Group: 1982-1989 | HIACE H50, 60, 70 SERIES, Important Note: 17mm ID