GKTech R32, Z32, R33, R34 Knuckle Included (R334-KNCK)
Suits Nissan R32, R33, R34
Brand: GKTech
Part Number: R334-KNCK
Description:
GKTech R32, Z32, R33, R34 Knuckle Included, part number R334-KNCK. Suits Nissan Skyline GTS-T R32, Nissan Skyline GTS-T R33, Nissan Skyline GT R34. Designed and engineered by GKTech in Australia, supplied in New Zealand by Stealth Ride.
This part is also used in the 300ZX Z32, R chassis Skyline Super Lock Combo - 15% off kit.
The V2 GKTECHSuper Lock R32/R33/R34/Z32 Front knuckles have been developed with the learnings from GKTech's previous V1 aluminium knuckles and they now present alight weight, sheet metal design after hundreds of hours of FEA (Finite Element Analysis) to improve the strength of the product but also keep the weight down. With 65+ degrees of steering lock being able to be achieved with ease whilst keeping a linear steering response these knuckles are suited to drift or circuit racers.
Featuring:
- spindle height raised for roll center and bump steer correction
- 65+ degrees of steering lock
- lightweight (3.08lbs lighter EACH)
- linear steering response for optimal drive
Installation notes
- Their offset steering rack spacers are recommended to eliminate the chance of steering bind.
- Steering lock of 65+ degrees quoted is based on having wheel clearance. If you have high offset wheels and your wheel hits the chassis then you may get less than this amount of steering lock.
- Only suits RWD steering setups. GTS-4 and GTR front suspension setups are different and these knuckles will NOT work with them.
- When using R34 front brake calipers the mounting holes need to be drilled out from 12mm to 14mm (there is enough material to cater for the increase in hole diameter).
- Does NOT have a provision for ABS
Suits
- Nissan Skyline GTS-T R32 (1989–1993), RB20DET
- Nissan Skyline GTS-T R33 (1993–1998), RB25DET
- Nissan Skyline GT R34 (1998–2002), RB25DE
