{"product_id":"gktech-v2-high-clearance-lower-control-arms-budg-4065-kit","title":"GKTech V2 High Clearance Lower Control Arms (BUDG-4065-KIT)","description":"\u003cp\u003e\u003cstrong\u003eGKTech V2 High Clearance Lower Control Arms (BUDG-4065-KIT)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSuits a wide range of Nissan models\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GKTech\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e BUDG-4065-KIT\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGKTech V2 High Clearance Lower Control Arms, kit part number BUDG-4065-KIT. Suits a wide range of Nissan models. Designed and engineered by GKTech in Australia, supplied in New Zealand by Stealth Ride.\u003c\/p\u003e\n\u003cp\u003eThe GKTECH V2 High Clearance LCA's are designed as a direct replacement for an OEM style LCA but with adjustment and loads of tie rod clearance!\u003cbr\u003e\u003cbr\u003eGKTech's Budget LCA's are great for someone that already has caster rods or wants caster rods as a separate piece. Even with the addition of their V4 high clearance caster rods, the cost of going this route is around 25% cheaper.\u003cbr\u003e\u003cbr\u003eThe arms offer 25mm of adjustment, will support 70+ degrees of steering lock, you can still run an OEM style swaybar and a lock stop has also been incorporated into the design.\u003cbr\u003e\u003cbr\u003eThey are also based on CMM data, are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut and CNC machined 16mm thick chromoly steel for maximum strength. To finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention and they are exclusively using Teflon lined bearings with dust covers for increased longevity.\u003c\/p\u003e\n\u003cp\u003e- Direct replacement of the OEM LCA\u003cbr\u003e- Feature 5\/8\" Teflon lined sphericals (inner) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.\u003cbr\u003e- Laser cut and CNC machined from 16mm thick 4130 Chromoly sheet.\u003cbr\u003e- CMM measured, CAD designed, FEA tested and CNC machined.\u003cbr\u003e- Choose between 3 different lengths;\u003cbr\u003e0 \u0026gt; +25mm\u003cbr\u003e+20 \u0026gt; +45mm\u003cbr\u003e+40 \u0026gt; +65mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE #1: The 0\u0026gt; +25mm are based off S13 lower control arms, meaning at their shortest they are OEM length and adjust to +25mm from OEM, if you are fitting these on an S14\/S15 the specs will be -9mm \u0026gt; +16mm from OEM.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe +20 \u0026gt; +45mm or the +40 \u0026gt; +65mm are based off S14\/S15 lower control arms, so if you are running these on an S13 they will be 9mm longer. In addition to that the R34 is 10mm longer then the S14\/S15 LCAs in general.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE #2: All the lca's have the caster rod in OEM position, to counteract the 25mm adjustment for each length of LCA one of the mounting holes has been elongated. \u003cbr\u003e\u003cbr\u003eNOTE #3: Due to the increased thickness of the lower control arms some caster rods will require a longer bolt which is not supplied. \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eWant to see the clearance and lock achievable with these arms? Click here:\u003cbr\u003e\u003c\/strong\u003ehttps:\/\/www.instagram.com\/p\/Bu7TDWSnyl9\/\u003cbr\u003e\u003cbr\u003eAn OEM style ball joint is to be used, you can either use your original ball joint or purchase new ones which they do sell.\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Length ball joint or +20mm? \u003cbr\u003e\u003c\/strong\u003eThey offer both OEM length (Non extended) ball joints and +20mm extended ball joints. The extended ball joints are 20mm longer (Picture: Taller) than the OEM design and aid in roll center correction for lowered vehicles. In some cases where you are running aftermarket drop knuckles (like they sell) or even their bolt on Roll Center correction kit, the extended ball joint shanks are not necessary. If you are using these LCA's in a Skyline, you cannot use the extended ball joints as the rotor will foul on the LCA when under suspension load. Additionally, this raises the upper arm which is detrimental to handling.\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eplease see the following fitment guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBJ274 fits the following vehicles;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Nissan S13 Silvia (front only)\u003cbr\u003e- Nissan 180sx (front only)\u003cbr\u003e- Nissan A31 Cefiro (front only)\u003cbr\u003e\u003cbr\u003eBJ274 Ball joint\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBJ291 fits the following vehicles;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Nissan S14 200sx (front only) \u003cbr\u003e- Nissan S14 Silvia (front only)\u003cbr\u003e- Nissan S15 200sx (front only)\u003cbr\u003e- Nissan S15 Silvia (front only)\u003cbr\u003e- Nissan Skyline R32 GTS\/GTS-T (front only)\u003cbr\u003e- Nissan Skyline R33 GTS\/GTS25-T (front only) \u003cbr\u003e- Nissan Skyline R34 GT\/GT-T (front and RWD only)\u003cbr\u003e- Nissan 300ZX Z32 (front only)\u003cbr\u003e\u003cbr\u003eBJ291 Ball joint\u003c\/p\u003e\n\u003cp\u003eThe V2 High clearance lower control arms have been designed off OEM and the ball joints they supply, which can be seen above. They are an aftermarket OEM replacement however, they cannot confirm other branded OEM replacement ball joints O.D matches the V2 High clearance LCA's that they sell.\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong or Longer?:\u003c\/strong\u003e 0 \u0026gt; +25mm (BUDG-0025), +20mm \u0026gt; +45mm (BUDG-2045), +40mm \u0026gt; +65mm (BUDG-4065)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Joints? (pair):\u003c\/strong\u003e None, BJ274 Ball Joint (9319478055001), BJ274 Ball Joint - 20mm Extended (9319478151683), BJ291 Ball Joint (9319478151543), BJ291 Ball Joint - 20mm Extended (9319478055990)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNissan 180SX S13 (1989–1991), CA18DET\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S13 (1988–1991), CA18DET\u003c\/li\u003e\n\u003cli\u003eNissan 180SX S13 (1991–1998), SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S13 (1991–1993), SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S14 (1993–1998), SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan Silvia \/ 200SX S15 (1999–2002), SR20DET\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GTS-T R32 (1989–1993), RB20DET\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GTS-T R33 (1993–1998), RB25DET\u003c\/li\u003e\n\u003cli\u003eNissan Skyline GT-T R34 (1998–2002), RB25DET\u003c\/li\u003e\n\u003cli\u003eNissan 300ZX Z32 (1989–2000), VG30DETT\u003c\/li\u003e\n\u003cli\u003eNissan Cefiro A31 (1988–1994), RB20DET\u003c\/li\u003e\n\u003cli\u003eNissan Laurel C33 (1989–1993), RB20DET\u003c\/li\u003e\n\u003cli\u003eNissan Laurel C34 (1993–1997), RB25DET\u003c\/li\u003e\n\u003cli\u003eNissan Laurel C35 (1997–2002), RB25DET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GKTECH","offers":[{"title":"0 \u003e +25mm \/ None","offer_id":48245979840683,"sku":"GKTECH BUDG-4065-KIT-01","price":921.99,"currency_code":"NZD","in_stock":true},{"title":"0 \u003e +25mm \/ BJ274 Ball Joint","offer_id":48245979873451,"sku":"GKTECH BUDG-4065-KIT-02","price":1061.99,"currency_code":"NZD","in_stock":true},{"title":"0 \u003e +25mm \/ BJ274 Ball Joint - 20mm Extended","offer_id":48245979906219,"sku":"GKTECH BUDG-4065-KIT-03","price":1119.99,"currency_code":"NZD","in_stock":true},{"title":"0 \u003e +25mm \/ BJ291 Ball Joint","offer_id":48245979938987,"sku":"GKTECH BUDG-4065-KIT-04","price":1061.99,"currency_code":"NZD","in_stock":true},{"title":"0 \u003e +25mm \/ BJ291 Ball Joint - 20mm Extended","offer_id":48245979971755,"sku":"GKTECH BUDG-4065-KIT-05","price":1099.99,"currency_code":"NZD","in_stock":true},{"title":"+20mm \u003e +45mm \/ None","offer_id":48245980004523,"sku":"GKTECH BUDG-4065-KIT-06","price":1126.99,"currency_code":"NZD","in_stock":true},{"title":"+20mm \u003e +45mm \/ BJ274 Ball Joint","offer_id":48245980037291,"sku":"GKTECH BUDG-4065-KIT-07","price":1266.99,"currency_code":"NZD","in_stock":true},{"title":"+20mm \u003e +45mm \/ BJ274 Ball Joint - 20mm Extended","offer_id":48245980070059,"sku":"GKTECH BUDG-4065-KIT-08","price":1324.99,"currency_code":"NZD","in_stock":true},{"title":"+20mm \u003e +45mm \/ BJ291 Ball Joint","offer_id":48245980102827,"sku":"GKTECH BUDG-4065-KIT-09","price":1266.99,"currency_code":"NZD","in_stock":true},{"title":"+20mm \u003e +45mm \/ BJ291 Ball Joint - 20mm Extended","offer_id":48245980135595,"sku":"GKTECH BUDG-4065-KIT-10","price":1304.99,"currency_code":"NZD","in_stock":true},{"title":"+40mm \u003e +65mm \/ None","offer_id":48245980168363,"sku":"GKTECH BUDG-4065-KIT-11","price":1183.99,"currency_code":"NZD","in_stock":true},{"title":"+40mm \u003e +65mm \/ BJ274 Ball Joint","offer_id":48245980201131,"sku":"GKTECH BUDG-4065-KIT-12","price":1323.99,"currency_code":"NZD","in_stock":true},{"title":"+40mm \u003e +65mm \/ BJ274 Ball Joint - 20mm Extended","offer_id":48245980233899,"sku":"GKTECH BUDG-4065-KIT-13","price":1381.99,"currency_code":"NZD","in_stock":true},{"title":"+40mm \u003e +65mm \/ BJ291 Ball Joint","offer_id":48245980266667,"sku":"GKTECH BUDG-4065-KIT-14","price":1323.99,"currency_code":"NZD","in_stock":true},{"title":"+40mm \u003e +65mm \/ BJ291 Ball Joint - 20mm Extended","offer_id":48245980299435,"sku":"GKTECH BUDG-4065-KIT-15","price":1361.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/9319\/0315\/files\/img_0452_black_thumb_1.jpg?v=1791941500","url":"https:\/\/stealthride.co.nz\/products\/gktech-v2-high-clearance-lower-control-arms-budg-4065-kit","provider":"Stealth Ride","version":"1.0","type":"link"}