Noise FilterRemoves radio noiseBrand: MSDPart Number: MSD8830Description: If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. When the MSD draws current, it will draw through the Noise Filter instead of directly from the battery, so all other accessories that operate off 12 volts, like the radio, fuel pump, or the engine computer, will be unaffected by the MSD. The Noise Filter will also prevent damage to the MSD during jump-starts and will keep a vehicle's 12-volt line "clean" by removing any voltage and current surges that could interfere with the operation of some MSD accessories such as the Soft Touch Rev Control or the Two Step Module Selector. It is recommended that the Noise Filter be used on installations with the MSD 7 and 8 Series Ignitions to erence.
🚫 COPYRIGHT NOTICE
The content on this page is the property of Stealth Ride (www.stealthride.co.nz) and may not be copied, extracted, or distributed without written permission.Any attempt to reproduce this product information without authorization will result in legal action and digital fingerprinting.Stealth Ride strictly prohibits scraping or reproduction of this content. IPs, user agents, and access times are tracked.You are currently viewing protected data belonging to www.stealthride.co.nz — unauthorized duplication is considered a breach of the Copyright Act.This content is uniquely generated and monitored. Reproduction or copying may result in copyright infringement proceedings.By accessing this data, you agree not to use it for unauthorized commercial purposes. Violations will be investigated.
Timestamp: 2025-04-03 13:52:40 | Product Handle: msd8830
Content Source: www.stealthride.co.nz
