Over 10,000 sold! This is probably the single best cooling mod you can do to your car!
The GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR/KA engine.
- Direct replacement of the standard fan
- Pulls 60% more air than the factory SR fan
We do sell an RB/ VG specific fan which can be seen here: https://au.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow
NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14/S15’s with Nismo engine mounts are fine and our fan will fit.
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
