Ford Flathead Electronic Distributor - 12 VoltSuit 1941-48models With 2-Bolt mountBrand: STROMBERGPart Number: STROM21A-12Description: NEW FROM STROMBERG for yourflathead Ford. The e-FIRE distributor, with electronic ignition, traditional looks, easy installation and simple set-up.
Every e-FIRE distributor looks like it belongs on your traditional flathead motor, with a regularblack cap and an old-school performance tag. It's also as short as we could make it, which is important if you're building a hot rod.
Every one has electronic ignition. No points, no condenser, no black(or red) box and very little maintenance. Just higher efficiency, economy and accurate spark timing.
It's easy to install, with just two wires to a regular coil, and adjustsjust like a stocker with the static timing screw on the side so you don't have to unbolt it and turn the whole body. The advance rate (and max total advance) is tuned specifically to suit the flathead V8 motor and every e-FIRE distributor is machine tested and ready to run.
NOTE: Must be used with a points style coil only, with aresistance of at least 3.0 Ohms or 1.5 Ohms with a ballast resistor. DO NOT use alow-resistance or HEI-style coil.
Features:
- Reliable electronic ignition - 12V negative ground
- No points. No condenser. No black(or red) box
- Simple two-wire hook-up
- OE-style timing adjuster. Stock black cap
- Old-school performance tag with unique ID
- Triggers most multi-spark CD ignitions
