GKTech Heat sleeve for S-Chassis, Skyline ABS Brake Line Delete Kit (HEAT-0326)
Suits Nissan S13, S14, S15, R32, R33, A31 & more
Brand: GKTech
Part Number: HEAT-0326
Description:
GKTech Heat sleeve for S-Chassis, Skyline ABS Brake Line Delete Kit, part number HEAT-0326. Suits Nissan 180SX S13, Nissan Silvia S13, Nissan Silvia S14, Nissan Silvia S15, Nissan Skyline GTS-T R32, Nissan Skyline GTS R33, Nissan Skyline GTS-T R33, Nissan Cefiro A31, Nissan Laurel C33, Nissan Laurel C34. Designed and engineered by GKTech in Australia, supplied in New Zealand by Stealth Ride.
This part is also used in the S-Chassis, Skyline ABS Brake Line Delete Kit kit.
The ABS module on the Nissan's of the 90's are renown for being unpredictable, particularly when on track. The GKTECH ABS Delete line kits are an easy bolt-on solution to remove the complete ABS system on your vehicle.
GKTech developed these kits after the frustration in trying to remove the ABS on their own cars. The normal route is to find a car without ABS and swap the master cylinder and all lines in the engine bay, however, these cars are becoming rarer by the day.
Their kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.
The FMVSS106 testing procedure that the lines have been tested against includes the following tests:
- 370lbs pull test
- 35 hour whip test
- 7000psi burst test
- -45degC to 146degC temperature tests
- 24 hour salt corrosion resistance test
- Direct replacement of the standard hard lines
- Cleans up the look of the engine bay
- For race cars only, however, no permanent modifications are required.
NOTE: T-piece fitting will differ from photos shown here, the photo here is of their original prototype
NOTE#2: Now available for both LHD and RHD vehicles
Suits
- Nissan 180SX S13 (1989–1991), CA18DET
- Nissan Silvia S13 (1988–1991), CA18DET
- Nissan 180SX S13 (1991–1998), SR20DET
- Nissan Silvia S13 (1991–1993), SR20DET
- Nissan Silvia / 200SX S14 (1993–1998), SR20DET
- Nissan Silvia / 200SX S15 (1999–2002), SR20DET
- Nissan Skyline GTS-T R32 (1989–1993), RB20DET
- Nissan Skyline GTS R33 (1993–1998), RB25DE
- Nissan Skyline GTS-T R33 (1993–1998), RB25DET
- Nissan Cefiro A31 (1988–1994), RB20DET
- Nissan Laurel C33 (1989–1993), RB20DET
- Nissan Laurel C34 (1993–1997), RB25DET
